Blogger Challenge: Chic Steals

4

Carly J. Cais has been a DIY’er from the moment she strung macaroni on yarn to make necklaces at age 3. Completely self-taught, she produced a short-lived clothing and jewelry line, RIVETED, in 2007, and founded her DIY and fashion blog Chic Steals in 2008. She loves sharing ideas and how-to’s for making one’s own clothing, accessories, and jewelry on her blog, along with local fashion lines lookbooks, styling inspiration, and outfit photos.

Chic Steals Logo

I was thrilled to be able to take part in M&J Trimming’s latest DIY Challenge, this time using rich Fall purples and shimmery golds from their box overflowing with fun DIY supplies and trims. I had a blast playing with pretty ribbons, delicate thread, and chunky chains! With M&J Trimming’s latest trims and embellishments, it’s easy to add personalization to pieces to take you from late Summer into Fall. Here are the projects I’ve been working on:

DIY Thread-Wrapped Hoops
Add a little texture and color to some plain hoop earrings by wrapping them in thin embroidery thread: an easy project to do while watching TV to keep your hands busy! Colored thread pops against metallic thread and creates a delicate – rather than overbearing – decorative touch.

Materials:
2 or more colors of embroidery thread
Plain hoop earrings
E-6000 glue
Scissors

threadwrappedhoops_materialsHow To:

1. Dab a small amount of E6000 glue onto the inside of one of your hoops where you want to start wrapping.

2. Place the end of the thread into the glue.

3. Wrap the thread numerous times around the hoop until you’ve built up enough.

threadwrappedhoops_step1

4. Cut the end of the thread, dab on some more glue, and press down to finish one color.

threadwrappedhoops_step2

5. Wrap the second (and third, if you’re using 3) color of thread in exactly the same way.

6. Allow the glue to dry before handling.

threadwrappedhoops_done2

That’s it! This technique can be done on any jewelry as long as there is something to wrap around – and it is also a great way to hide tarnishing or rubs! Plus, if you get tired of the colors – snip, snip! – And you’re back to your original piece!

threadwrappedhoops_done3

Enjoy jazzing up some boring jewelry with a bit of color for Fall :-)

DIY Chunky Chain Ribbon Necklace
Sometimes a chunky chain is just begging for a bit more adornment. Adding a bright pop of color with a soft satin ribbon adds a feminine touch that contrasts with the boldness of the chain.

Materials:
Chunky plastic chain
1″+ – wide satin ribbon
Scissors
E-6000 glue
Lighter
Clothespins
Pliers

chunkychainnecklace_materials

How To:

1. Use pliers to separate a chain link so you have a choker-length chain.

chunkychainnecklace_step1

2. Heat-seal the end of the ribbon with an open flame.

chunkychainnecklace_step2

3. Thread one end of the ribbon into the last link of the chain.

4. Spread a small line of glue onto the end of the ribbon.

chunkychainnecklace_step3

5. Fold the ribbon over.

6. Use clothespins to secure the fold until the glue dries.

chunkychainnecklace_step4

7. Repeat for the other end of the ribbon.

8. Once the glue is dry, cut the ribbon in half, angling the ends.

9. Heat-seal both ends to finish.

chunkychainnecklace_step5

And you’re done! With a statement piece like this, you can wear all on its own, or layer more delicate chains underneath for a truly over-the-top feel.

chunkychainnecklace_done3

DIY Ombre Hair Elastics
It seems in every store soft, tied hair elastics are flying off the shelves – and at $16 or more a set, they pose a pretty serious threat to your wallet. Foldover elastic by the foot is much more affordable – and totally customizable – for your own unique take on the trend.

Materials:
Stretchy foldover elastic
Paint in your favorite colors (try to use fabric paint if you have it)
Paint brush
Scissors
Lighter
Something to protect your work surface

ombrehairelastics_materialsHow To:

1. Eyeball the size of your elastics by making sure you have enough to go around your wrist + 2″ or so. Fold over.

2. Tie near the end in a tight knot.

ombrehairelastics_step1

3. Cut the ends close to the knot.

4. Use a flame to heat-seal the cut ends.

ombrehairelastics_step2

5. Dab paint on to the folded end, putting less on near the knot to create an ombre effect.

ombrehairelastics_step3

6. Allow to dry.

ombrehairelastics_done1

And that’s all there is to it! You could potentially use the elastics as-is, without color – but I love adding a bit of personalization to everything, so why not? Try different colors of elastic, and contrasting colors of paint, to create a fun rainbow!

ombrehairelastics_done3

DIY Rhinestone Focal Braided Bracelet/Choker
Sparkly jewelry livens up any outfit and brings glamour day or night. Creating your own custom rhinestone-encrusted setting to a focal piece is a challenge, but the results are amazing and truly worth it. Plus, what could be better than a piece you can wear as a bracelet or a choker necklace? Double duty accessories are always a blast!

Materials
braided gold leather trim
rhinestone crystals
focal druzy stone
Apoxie Sculpt epoxy clay in black
necklace end crimps
small round jump rings
2 oval jump rings
clasp & ring
toothpick
scissors
pliers

rhinestonefocal_materials

How To
1. Remove an equal amount of both parts of the Apoxie Sculpt.

rhinestonefocal_step1

2. Knead together for a minute or so until thoroughly mixed.

rhinestonefocal_step23. Form into a long snake.

rhinestonefocal_step34. Wrap around the edge of your druzy focal.

rhinestonefocal_step45. Smooth the Apoxie clay with your finger to fix any cracks or bumps.
6. Press an oval jump ring into either end of the focal, pressing into the clay and smoothing any gaps around the wire. Allow the jump ring to protrude slightly so you can attach jump rings to it later.

rhinestonefocal_step57. Use a toothpick to press the rhinestones into the clay around the edge of your focal, making sure to sink them in slightly so the clay “grips” them.
8. Allow to dry 24 hours until the clay is hard. (*hint: For a glossy enamel-like finish to the epoxy clay, once dry you can coat with 1-3 coats of Mod Podge Gloss if you so choose.)
9. Attach an end crimp to one end of the leather braid.

rhinestonefocal_step6

 10. Use a jump ring to attach to the loop at one end of the focal.

rhinestonefocal_step7

11. Wrap the braid around your wrist several times, until it is the length you want.

rhinestonefocal_step8

 12. Cut.

rhinestonefocal_step9

13. Attach a crimp end and jump ring to the cut end of the braid, and attach to the other side of the focal.
14. Cut the braid in half, and finish each end with a crimp end, jump ring, and the clasp pieces.

rhinestonefocal_step10

You’re done! Wear wrapped around your wrist several times (as a single piece arm party!), or even as a necklace if the mood strikes.

rhinestonefocal_done3

rhinestonefocal_done4

4 comments on “Blogger Challenge: Chic Steals

  1. Alexandra says:

    Hey! Nice blog!…Useful ideas here :D

  2. Leah Yablong says:

    Love your DIYs Carly! I especially love the double duty cabochon necklace/wrap bracelet.

  3. […] gold hoop earrings: DIY (tutorial here). “Love” necklace: c/o Accessorize. Snake-print velvet camisole: Topshop. Black + White […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s