Rev Up a Classic Shawl with Biker Chic Embellishments

6

By Roseann

Scarf

Biker influenced details will be seen everywhere this fall such as; fringe, studs, zippers, and other hardware.  Although this is a trend that has been seen time and time again, designers this season are pairing the hardened classic look with more feminine pieces like gowns and flirty skirts. Although it’s not quite time to pull on a leather biker jacket, the weather is quite right for soft jersey knit shawl.  I experimented with some ultra suede fringe and antique brass nailheads and am quite please with the contrasting robust embellishments on a soft draped fabric.

scarf1

 Materials

  • 2 yards of cotton or silk jersey knit fabric or a shawl purchased or preowned
  • 2 packages Ss30 Dome Nailheads 4-ProngStyle: 04030
  • 2 yards of 2″ Faux Leather Cut Fringe Style: 30246, I used a 6” fringe Style: 00807-bk which can be purchased by calling 1-800-9mjtrim.
  • 1 bottle Gem-Tac Glue 4 Oz. Style: 29471
  • 1 Ez Rhinestone Setter Set Style: 39318, or Brisk-Set Rhinestone Setter Style: 16512 and Nailhead Adapter for Brisk-Set Style: 16509 if you plan to work more frequently with nailheads.  The latter setter is more expensive, but will save you an immense amount of time.

 Directions

  • Cut fabric down to 1 yard wide, or the desirable width you’d like for your shawl to be.  Finish ends with a sewing machine.
  • Cut your fringe into two 1 yard pieces and sew to the short ends of the shawl.
  • Choose which side you’d like to embellish.  Then measure up 16” on the right side and mark.  Using a yard stick create marking for studs in a straight line 1” apart beginning at the bottom left corner to the 16” mark on the right hand side.  Be sure to create your marking on the wrong side of the fabric. Since I used a black fabric I used a whiteout pen to make my marks, a paint marker will work equally as well.
  • Continue with another line of markings 1 ½” bellow the first, repeat until you have created 7 diagonal lines.
  • Now you are going to add each of your nailheads to the markings on the fabric using your setter.  Since jersey is such a light weight fabric I added a drop of Gem-Tac to the back of each nailhead.  I notice that the prongs are more likely to come out of the fabric if you don’t secure it with a little glue.  You are also going to want to let your glue dry for a full 24 hours before wearing.
  • Enjoy!

scarf2

scarf4

6 comments on “Rev Up a Classic Shawl with Biker Chic Embellishments

  1. robin abdulla says:

    So cool!!!! I love all the ideas!!!! Any thoughts on trying to be-jewel some cute flat shoes? Looking for some ideas!

    • Roseann says:

      Hi robin, no I have not thought about embellishing shoes. I am sure we can come up with a few ideas though. Check back in a week or two and I will try and post something for you. Thanks for reading.

  2. gretchen says:

    i find it very odd that there is no link back to the items listed to make this… or to the main page for a search.

  3. gretchen says:

    ok, found the link to the main page hiding there in the corner!

  4. [...] Head over the M&J Trimming to find out how to give a classic shawl an edgier look with the addition of suede fringe trim and brass nailheads.  Very cool!  Go to the tutorial. [...]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s